1 / 4
SK150S housing for Makita — image 1
1 / 4

SK150S housing for Makita

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The best housing for this PSU

Rating
0 / 5
Likes
1
Downloads
11
Makes
0
Views
110
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

I needed adjustable psu for makita battery, didn't like any of the models here, so I made my own.

I used SK150S from aliexpress, I like it because it has step down and boost option and plenty of amperage.

I designed the housing so that it can be powered through Makita battery by default but I can also switch off the battery with KCD1 switch and I can power it up from side XT60 switch, which would be useful for any longterm applications that would otherwise drain my battery.

I use additional 30mm fan for cooling. 

I used makita battery mount from aliexpress, which screws into my printed housing, its much better than printing mount myself.

Wiring is easier with soft silicone.

BOM:
1x KCD1-6-201 switch

1x SK150S

1x30mm FAN

2x XT60 PLUG

1x DC PLUG 55x21

2x BANANA PLUG SOCKETS FOR MULTIMETER CABLES

1x MAKITA BATTERY MOUNT FROM ALIEXPRESS

1x 5*20mm FUSE HOLDER