Armrest for Toyota MR2 AW11 Mk1a (1985-1986)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D-printable replacement for the center console armrest in your Mk1a Toyota MR2
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This armrest design clips right into the location of your old one without any modification.
STL files are included for convenience, but you should use the STEP files for you print!!
There are two variants:
A slick, basic armrest
A slightly taller armrest that has a convenient phone-sized pocket
The model is just under 250mm long, so many printers will be able to print it in one piece. If your print volume is smaller, you can print this model at an angle (ensure that your settings are dialed if using ABS/ASA), or print it in two pieces (which is what I did using OrcaSlicer's dovetail cut). I would not recommend PLA if you live somewhere that gets summer.
Please reach out if you have any issues.
Recommended Materials:
ASA
ABS
PETG-CF
Print settings:
TBD
FreeCAD project files are attached if you'd like to modify the design. Let me know what you come up with!