1 / 4
Armrest for Toyota MR2 AW11 Mk1a (1985-1986) — image 1
1 / 4

Armrest for Toyota MR2 AW11 Mk1a (1985-1986)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A 3D-printable replacement for the center console armrest in your Mk1a Toyota MR2

Rating
0 / 5
Likes
2
Downloads
24
Makes
0
Views
94
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

This armrest design clips right into the location of your old one without any modification. 

STL files are included for convenience, but you should use the STEP files for you print!!

There are two variants:

  • A slick, basic armrest

  • A slightly taller armrest that has a convenient phone-sized pocket

The model is just under 250mm long, so many printers will be able to print it in one piece. If your print volume is smaller, you can print this model at an angle (ensure that your settings are dialed if using ABS/ASA), or print it in two pieces (which is what I did using OrcaSlicer's dovetail cut). I would not recommend PLA if you live somewhere that gets summer.

Please reach out if you have any issues.

Recommended Materials:

  • ASA

  • ABS

  • PETG-CF

Print settings: 

  • TBD

FreeCAD project files are attached if you'd like to modify the design. Let me know what you come up with!

Tags