XENEON Edge front mount for FRAME 4000D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front mount bracket for 14.5" touchscreen in the frame 4000D case
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 1060
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Files and how many of each you will need to print:
1x Xeneon edge front mount - Main part A
1x Xeneon edge front mount - Main part B
2x Xeneon edge front mount - inner support
Optional
2x Xeneon edge front mount - internal cover A
2x Xeneon edge front mount - internal cover B
The optional parts are to cover the small gabs left on each side of the infiniral so you cannot see into the case from the front, and air/dust will not be able to get in and out since we are removing the dust filter.
Hardware needed:
8x M5 bolts (Any length between 12 and 16mm will work)
8x M5 Nuts (To mount to the infinirails)
10x M5 Nuts (If you want to use the magnets in the xeneon edge to attach to the mount instead of screws)
Glue (optional)
Orient the parts as shown above, and add a support enforcer to only the underside of the large parts - the rest of the parts requires no support.