Washing Machine Drain Adapter G3/4 with TPU Seal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
G3/4 threaded washing machine drain adapter with hose barb and TPU seal for under-sink installations.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a G3/4 inch washing machine drain adapter designed for under-sink (washbasin) installations.
It allows a washing machine drain hose to be safely connected to a standard G3/4 threaded outlet.
The design consists of multiple parts that can be separated in the slicer using “Split to Objects”, allowing each component to be printed individually.
A TPU sealing ring ensures a tight and leak-free connection to the threaded fitting.
Assembly / Installation
Print all parts (adapter body and sealing ring separately).
Insert the TPU sealing ring into the groove inside the G3/4 thread.
Screw the adapter onto the G3/4 outlet by hand.
Push the washing machine drain hose onto the hose barb.
Secure the hose using a hose clamp for reliable operation.
Important: Always use a hose clamp to prevent the hose from slipping off under pressure.
Print Settings & Recommendations
Material (adapter): PETG (recommended)
Material (seal): TPU
Layer height: 0.2 mm
Wall/perimeters: 3–4
Infill: 20–30%
Print orientation: Thread facing upward for best accuracy
Supports: Not required
PETG is strongly recommended due to moisture resistance and improved durability compared to PLA.
Additional Notes
Two fit variants are included: Tight Fit and Loose Fit
Designed specifically for washing machine wastewater, not for pressurized water lines
Hand-tightening is sufficient; do not overtighten
This adapter is a practical and compact solution for clean and reliable washing machine drainage under a sink.