1 / 13
Noma-Dryer Lite: Desiccant Tray for Inomata Dry Food Stocker 6.0 — zdjęcie 1
1 / 13

Noma-Dryer Lite: Desiccant Tray for Inomata Dry Food Stocker 6.0

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is Noma-Dryer Lite, a smart, snap-fit silica gel tray designed specifically for the Inomata Dry Food Stocker

Ocena
0 / 5
Polubienia
1
Pobrania
16
Wydruki
0
Wyświetlenia
67
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is Noma-Dryer Lite, a smart, snap-fit silica gel tray designed specifically for the Inomata Dry Food Stocker 6.0 (イノマタ化学 乾物ストッカー 6.0)—the absolute gold standard for DIY filament storage boxes in Japan.

This model is a companion to my previous project, the active electric filament dryer "Noma-Dryer." By utilizing the exact same bottom-mount interface of the Inomata stocker, you can now seamlessly hot-swap your setup between Active Drying 🔁 Passive Storage in seconds.

Why "Lite"?

While active electric drying is great, we also need a sustainable, neat way to keep our filaments bone-dry during long-term storage.

Instead of messing around with loose desiccant packets or tea bags after recharging your silica gel in the microwave, you can simply pour the loose beads directly into this tray.

Key Features

  • 100% Toolless & Hardware-Free: The mesh bead covers utilize a robust snap-fit mechanism. No screws, no glue, no hassle. Even if you turn the tray upside down, the beads will not spill.

  • Dual-Chamber Design: Divided into two separate compartments. This allows for staggered maintenance—you can swap out just half of your silica gel at a time to ensure a consistent climate inside the box.

  • System Ecosystem Compatibility: It shares the same footprint as the original Noma-Dryer. Once your filament is fully dried via the electric unit, just swap the bottom tray with this "Lite" version for long-term storage.

  • Ultra Low-Profile: Sleek and compact design that replaces the original bottom cap of the Inomata stocker without adding unnecessary bulk.

Print Settings & Tips

The model consists of only 3 parts:

  • 1x Main Tray Body

  • 2x Mesh Bead Covers

My Print Settings (Reference)

  • Printer: Creality Centauri Carbon

  • Filament: PETG-GF (Recommended for durability and heat resistance if you put warm beads in)

  • Nozzle: 0.4mm (0.28mm Layer Height)

  • Walls: 2 perimeters

  • Top/Bottom Layers: 3 layers (0.6mm)

  • Infill: 10% Grid

💡 Printing Tip:

The model is very straightforward to print, but please pay attention to the print orientation of the Mesh Covers. Make sure to print them in a direction where the snap-fit clips are not prone to layer splitting under tension. The clips should bend along the filament strands for maximum longevity.

Feedback is always welcome! If you print one, please post your makes and let me know how it works for you.

Tagi