IIDX E11 LED Ligthbulb Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
E11 filler stubs for supporting small WS2812B PCBs
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
E11 filler stubs for supporting small WS2812B PCBs, meant for replacing the original LED lightbulbs found in the spotlights from a beatmania IIDX Tricoro cabinet with said PCBs.
Fits an Edison E11 nicely, however it might break if you wind it too tight, so be careful.
Designed for setting up UPPER LEDs from LM cabinets. Meant to hold 11 LEDs per 4 spotlights.
Some indications:
Outer spotlights will support 2 bit LED PCBs (2 supports)
All remaining spotlights will support 3 bit LED PCBs (6 supports)
Keep in mind that between these LEDs, there are supposed to be the LED strips that can be found inside the top speaker:
Printed with Elegoo PETG PRO.
Printing settings:
Sparse infill pattern: Gyroid
Supports: Enabled
On build plate only: Enabled
Brim-object gap: 0.2mm
Filament settings for Elegoo PETG PRO:
Max volumetric speed: 14m/s
Nozzle temperature: 260ºC
First layer nozzle temperature: 265ºC
Pressure advance: 0.06mm
Retraction length: 0.6mm