Male Connector for Lakeshore Learning Fort Builder - 5/8" dowel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Male end connector for the Fort Builder, sized to fit a 5/8" dowel. good for custom pieces or replacing broken.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Lakeshore Learning Ultimate Fort Builder has been popular in our household for years now! We've always wanted to make cross-braces, extra-long pieces, etc. But the manufacturer only has the set pieces.
Then I found the model on Cults3d!
The creator recommends a 1/2" dowel, but that felt too loose in my test print. I scaled the "cup" portion of this model to fit a 5/8" dowel, which seemed better than scaling down, and is a much stronger dowel.
For anyone who wants to do the same: I first tried to cut the top portion off & attach it to a new cup model, but had a hell of a time mating them. I found more success cutting them into parts, scaling the bottom part, then re-merging.
Note: OrcaSlicer complains about "non-manifold edges", but I don't have a windows machine to fix it, and it prints just fine.
I printed in PLA because that's what I have; we'll see how long it lasts.
You definitely need support for the inside of the cup; I found the "tree" style much easier to remove.
Dimensions of the original 1/2" model (according to OrcaSlicer):
OD: 17.5 mm
ID: 14 mm
wall thickness: 3.5 mm
Inner recess depth: 15 m
outer height of cup portion: 17 mm
My model:
OD: 20 mm
ID: 16 mm
wall thickness: 4 mm