Male Connector for Lakeshore Learning Fort Builder - 5/8" dowel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Male end connector for the Fort Builder, sized to fit a 5/8" dowel. good for custom pieces or replacing broken.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Lakeshore Learning Ultimate Fort Builder has been popular in our household for years now! We've always wanted to make cross-braces, extra-long pieces, etc. But the manufacturer only has the set pieces.
Then I found the model on Cults3d!
The creator recommends a 1/2" dowel, but that felt too loose in my test print. I scaled the "cup" portion of this model to fit a 5/8" dowel, which seemed better than scaling down, and is a much stronger dowel.
For anyone who wants to do the same: I first tried to cut the top portion off & attach it to a new cup model, but had a hell of a time mating them. I found more success cutting them into parts, scaling the bottom part, then re-merging.
Note: OrcaSlicer complains about "non-manifold edges", but I don't have a windows machine to fix it, and it prints just fine.
I printed in PLA because that's what I have; we'll see how long it lasts.
You definitely need support for the inside of the cup; I found the "tree" style much easier to remove.
Dimensions of the original 1/2" model (according to OrcaSlicer):
OD: 17.5 mm
ID: 14 mm
wall thickness: 3.5 mm
Inner recess depth: 15 m
outer height of cup portion: 17 mm
My model:
OD: 20 mm
ID: 16 mm
wall thickness: 4 mm