Spool Bearing Roller for Core-One Drybox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool holder with Roller bearing 608ZZ 8x22x7 mm for the Core-One Drybox.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Print as in the .3mf file and slicer picture.
You will need 2 608 roller bearings that is 8x22x7 mm, meaning outer bearing diameter 22 mm, inner hole diameter in the bearing 8 mm and bearing 7 mm thick.
You will also need 4 M3 screws that is 6mm long and with Pan head.
The Distance in-between the bearings and inside the roller need to be a certain length so the bearings roll freely, for me the Distance-04 worked and is included in the .3mf file but I also include a 0.2 mm shorter called Distance-02 and a 0.2 mm longer called Distance-06.
You will also find the STEP files in the STEP folder for all parts if you want to modify.
Should print with 4 walls for needed strength.
The files provided are for personal use at your own risk. I make no warranties, express or implied, regarding the safety, reliability, or suitability of any printed models. You are solely responsible for verifying that any downloaded design is safe, functional, and appropriate for your intended use, including but not limited to material choice, print settings, and post-processing. By downloading or using these files, you agree that I am not liable for any damages, failures, or consequences resulting from their use.