1 / 2
GPS Antenna Holder 18mm for HGLRC MY7
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for a gps antenna for the fpv-frame of the HGLRC MY7
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Created this model to hold the gps antenna for my HGLRC MY7 frame. The antenna i used is the Sologood M10-180C, with a width of 18mm and a heigh of 19mm without the plug.
The distance of the fixing screws (holder to frame) is 24mm.
I used PLA PRO for this print.
Filament (with supports): 6,62g
Printing Time: ~21min
Supports needed: yes
