IIDX Top Speaker LED Strip Channels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IIDX Top Speaker LED Strip Channels for 5mm strips
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
beatmania IIDX Top Speaker LED Strip Channels for 5mm strips, designed to replace the original LED PCBs inside the Tricoro cabinet's top speaker.
Designed for setting up the UPPER LED lights from the LM cabinet, 54 LEDs per side.
Some indications:
These go right where the LED PCB's are, using the same screws.
These were designed around WS2812B LED COB 5mm strips, with a density of 120led/m
You will need to print 8 channels in total
These are to be used along with the E11 supports for the spotlights:
Printed with Elegoo PETG PRO.
Filament settings for Elegoo PETG PRO:
Max volumetric speed: 14m/s
Nozzle temperature: 260ºC
First layer nozzle temperature: 265ºC
Pressure advance: 0.06mm
Retraction length: 0.6mm