UniFi G4 Doorbell Pro Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Previously had my G4 doorbell pro plugged in through AC. Created this to mount it along with the whole adapter cable.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Recently obtained a G4 doorbell pro and created this to mount it along with the AC adapter cable.
I have an AC plug outside and this was the quickest way to mount the doorbell instead of drilling holes through the wall to some other nearby outlet. This allows you to wrap as much of the 7 foot USB cable in as you need to, as well as gives space for the USB plug that sticks out of the back of the doorbell, without drilling a separate hole for that.
I set the holes for the backplate at the same distance as the doorbell mounting plate, so that in the future if I need to, I can remove this and mount the doorbell straight to the wall (if I do want to run the cable to the interior, or convert to POE).
Printed at .2mm. Print the baseplate flat on its back and the slider on its front (like a v). Shouldn't require any supports.
Category: DIY