Fiamma Awning Rafter/Strut Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hanger for Fiamma awning rafter/strut that drops into 8020 15 series with quarter turn to secure
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Fiamma sells an "optional" rafter/strut that reinforces the center area of their popular awnings for camper vans. I use it all the time.
The cross bar supports for our van bed are 15 series 8020. I wanted a way to suspend the Fiamma awning strut. These hangers fit into the 8020 slot and with a quarter turn are secure and snug to the van garage ceiling.
The Fiamma strut comes with plastic mounting brackets which are molded quite well and just flexible enough to snap the strut in and out of nicely. So this hanger just leverages them. I simply used the screw and some epoxy to attach the Fiamma bracket to my hanger.