print in place friction locking hand fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a friction-locking hand fan. Print in place, use PLA, no supports/brims.
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 210
- Wydruki
- 1
- Wyświetlenia
- 642
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a friction-locking hand fan.
I designed this because daughter's school has no A/C and there was a heat wave. So I needed something that prints overnight and can resist some amount of abuse. It held up to a class of overheated 6 year-olds just fine, so its chunky enough, I suppose. Hope someone finds it useful.
Print in PLA, as stiffness is part of what allows the fan to lock open.
Print in place without supports or extra brim(there is a custom one).
Once printed,
cut off the front and back brims
firmly force the pivot pin to rotate by using (both) pin "legs". This does require applying some force - just apply evenly on both sides and it'll be fine.
with a long knife, gently separate the fan blades that may have slightly stuck together