1 / 1
print in place friction locking hand fan — image 1

print in place friction locking hand fan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a friction-locking hand fan. Print in place, use PLA, no supports/brims.

Rating
5 / 5
Likes
44
Downloads
210
Makes
1
Views
644
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a friction-locking hand fan.

I designed this because daughter's school has no A/C and there was a heat wave. So I needed something that prints overnight and can resist some amount of abuse. It held up to a class of overheated 6 year-olds just fine, so its chunky enough, I suppose. Hope someone finds it useful.

Print in PLA, as stiffness is part of what allows the fan to lock open.

Print in place without supports or extra brim(there is a custom one). 

Once printed,

  • cut off the front and back brims

  • firmly force the pivot pin to rotate by using (both) pin "legs". This does require applying some force - just apply evenly on both sides and it'll be fine.

  • with a long knife, gently separate the fan blades that may have slightly stuck together

Tags