1 / 1
Nevermind: an activated carbon exhaust mod for the Elegoo Centauri Carbon — zdjęcie 1

Nevermind: an activated carbon exhaust mod for the Elegoo Centauri Carbon

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An easy to print carbon sink for the Elegoo Centauri Carbon 1

Ocena
0 / 5
Polubienia
3
Pobrania
5
Wydruki
0
Wyświetlenia
155
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I tried to use one of the Hepa filter mods for the Elegoo Centauri Carbon, but after trying repeatedly to buy filters from Voxel, I decided “nevermind” and made my own. I didn't really need the HEPA filter, and just wanted to prevent the VOCs (which my wife is sensitive to) and so, since I had a bunch of activated carbon lying around, decided to make this. 

It mounts to the existing CC1 screw holes and reuses the factory screws, so no extra hardware should be required. Mount the frame with screws, then fill the insert with activated carbon, slide the lid on, and then slide the insert into the mounted frame. 

I fill this with loose carbon pellets. The box takes around 5 or 7  Tbsp of pellets. I'm using AC Infinity carbon, but I'm sure any pellets would do. 

amazon.com/dp/B0CFCKFPHR?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_5

I don't know any science numbers about how effective it is, but before this, my wife couldn't come within 10 feet of an active printer without getting a scratchy throat, and after this she can hang out in my office while it's printing without notice. 

Note that this is loosely remixed from @aldinsn's model. I would have properly remixed it, but this was my first 3D model, and frankly I didn't know how to, so I ended up reengineering the entire thing in Tinkercad. If Voxel is more accommodating to you, then you can just use his model instead, but honestly I'm much happier with the performance of raw carbon, as the more I learn, the more inclined I am to think HEPA, especially in single-pass format, is just not very beneficial here at all. 

Tagi