1 / 4
Re-mix of Swing Mechanism by Adam — zdjęcie 1
1 / 4

Re-mix of Swing Mechanism by Adam

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple swing-arm mechanism demonstrator.

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
1
Wyświetlenia
80
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Public Domain

First, let me say that the collection of simple mechanism models by Adam is wonderful! I highly recommend a look!

That said, I had a difficult time getting the original Connecting Rod onto the Crank and Arm pins without breaking them. This re-mix solves that by using separate pins, printed lengthwise instead of stacked, and sinking small holes in the Crank and Arm. The pins should fit snugly, but can be permanently installed with the tiniest drop of cyanoacrylate glue (Super Glue, or similar). I have included a pin with both the Crank wheel and Arm files. The orientation of the pins while printing is important to their strength, so the individual print file for them is set up properly. They do require support.

As I am still learning AutoCAD, I also added knurls to the Crank to practice circular arrays…

Tagi