Liczymy pasujące modele…
A hinged metal arm for 3D printers, simplifying cable management with durability and easy maintenance in mind. Based on the open-source PRUSA SwingArm, this short, hinged metal arm guides a sleeved cable bundle (or a USB/CAN cable). The…
Dieses Modell ist mehrteilig, damit weniger Stützmaterial benötigt wird. Neu (April 26): Längere Version für 56er Rahmengröße This model is multi-part, so less support material is needed. New (April 26): Longer version for 56cm frame size
UPDATE: Improved opening for the M4 PTFE tube. Less pressure on the tube, and easier insertion for the PTFE tube and the cable. Printed with PETG, without supports, layer height 0.2 mm in balance mode. For assembly: The "swingarm flex…
Basic mount for a insta360 pole onto a Parajet maverick swinger. Printed out of TPU material acts as a vibration absorber for better footage as well. Using M8 or 5/16 bolts (M8x40) It is attached using existing swingers holes and fastened…
Cable chain? Umbilical? Introducing the SwingArm! We love to innovate and we constantly improve our existing printers. Even with the tight time constraints in the development of the CORE One, we reworked a vital part of the printer before…
Ich habe den Prusa SwingArm mit der Befestigung der Schleppkette von Sovol vereint und das ist dabei rausgekommen. Bei mir funktioniert es zuverlässig. Ein Glied der Schleppkette habe ich entfernt, damit das Kabel länger wird. Und die…
With the Prusa CORE One they introduced a new way of guiding the cables and filament to the extruder, something they call the SwingArm. I've remixed the design to make it compatible with the K1/K1C, when using this Lid Riser . Any other…
Designed for SWM SM 125 R 2016-2024 If you need to fit it onto a smaller 3D Printer, just cut it into parts in your slicer/cad.
Simple Prusa Swing-Arm modified to work with a K2 Plus. I did this so that I could print PPA-CF/PPS-CF without it breaking in the PTFE (mainly during initial purging/nozzle cleaning). The factory PTFE is too tightly ran and bends the…
Inspired by Prusa's SwingArm this is a low drag, 3D printed cable arm for a BLV mgn cube or any other printer with a free 20mm aluminium extrusion. It has two channels, one for wires and one for a CPAP hose. The arm has a length of 230mm.…
This mod brings the Prusa Core ONE's SwingArm system to the K1 series printers via mounting points from LEOTE's Lid Riser V3. The original drag chain system has its flaws, and even the custom printed mods weren't performing much better…
UNTESTED ATM This adapter will allow the swingarm to be used while at the same time as the internally mounted filament runout sensor (that's the plan, anyway). Print with PETG or better for warmer temperatures when running the printer…
I cannot find swingarm bolt cover for my Honda Shadow VT600 1988, so I created mine. They are very simpli and fit snug. On my model the right swingarm hole is 0,15mm biger than left, so these two parts on model are not identical. Have…
While fastening the Prusa Swing Arm, I realized that I had applied too much force to the rear sheet metal, which could potentially lead to deformation or stress-related issues. To counter this, I took measurement of the dimensions of the…
Kinda flimsy and it need bearings, I used a 3mm nail, that I cut to fit, for the shafts
Anti-Sag! The most Reliable and Permanent Solution for CORE One Extruder Cable. With or without MMU3! Improved, inspired and remixed from Alienbliep 's idea, with origin in hachleitner 's design. All 3D models are built from scratch ,…
Really liked J.K.'s model for a swing-arm. Only, having it printed and installed, found that it still allowed the cable to sag a bit too much for my liking. Therefore redesigned it, and made it more printable, which was Condorman's…
A hinged metal arm for 3D printers, simplifying cable management with durability and easy maintenance in mind. Based on the open-source PRUSA SwingArm, this short, hinged metal arm guides a sleeved cable bundle (or a USB/CAN cable). The…
Für das reibungslose Durchschieben von MMU und seitlicher Zufuhr mit geraden Eingängen zum Aufstecken auf den SwingArm. Der Kabelbaum des Extruders kann mit eingehängt werden. Ausserdem braucht ihr noch 3St. PC4/M10 PTFE…
Bridge extender! Keeps the cable horizontal Extra materials: -Two small plastic cable ties -Two or more Velcro cable ties, in addition to those already included Printing details: Material: PET-G Infill: 100% Border: 20 or more
Dieses Modell ist mehrteilig, damit weniger Stützmaterial benötigt wird. Neu (April 26): Längere Version für 56er Rahmengröße This model is multi-part, so less support material is needed. New (April 26): Longer version for 56cm frame size
Using bambustudio - I re-mixed the original flat top swingarm cover on Thingiverse https://www.thingiverse.com/thing:7102387 & re-mixed the top yoke plug from Printables, to make a rather nifty swingarm pivot cover with the triumph logo.…
UPDATE: Improved opening for the M4 PTFE tube. Less pressure on the tube, and easier insertion for the PTFE tube and the cable. Printed with PETG, without supports, layer height 0.2 mm in balance mode. For assembly: The "swingarm flex…
A simple plug for the swingarm pivot in the frame, to act as a frame protector. MX boots wear the frame coating, this adds a buffer. No logo, simple to remove for cleaning and maintenance. simple print, no supports. I printed using PETG,…
When I bought my transmitter there was a poker that stayed in the position you put it in (airplane mode or something) I couldn't find the part in the Netherlands, so I copied it myself. I use elastic bands in your hair the smallest there…
Hier eine Griffvariante mit Schwenksystemanschluss bei ansonsten gleichem Grifftyp ;) Innen gibt es einen Hohlraum damit die Kamera im Wasser oben schwimmt.
Changelog 2022-08-23 v1.01 increased infill and perimeters for all caps 2022-08-21 v1.0 initial public release Please note: I have intended my models to be free of cost for the community, fun to print and a joy to use. Sadly, some…
A dust/water cover for the swingarm bolt on Razor motorcycles. Tested on SX500/eFTR Jr. and MX650
This is a Frame Tube Cap the Zero Motorcycles Zero S Motorcycle. You can use it to store things in the swingarm frame tube. I printed it in TPU and stored my warning west in the tube. :) It is a very snug fit with my Prusa MK3S, so maybe…
Unscrew the swing arm and slide it over. cut the offset cylinder lengthwise and fasten it with cable ties or wire All printed in TPU as massive part, no infill
Printed on Anycubic Kobra 2, PLA Tough, 30% infill, no brim, no supports, with logo against plate (upside down). The logo part could perhaps use supports for a nicer finish. But you can print safely without supports. I've also included a…
I lost my washers so i make new one. 100% infill There are 2 files 1 for flat screws and the other 1 is countersunk update 2023-09-01. Its working well on my bike, no problem at all, it can replace the steel one if you loose it.
I lost the endcap for my swing arm, so I designed my own. It's nearly identical, and with a slight sanding job, some filler, and spray paint, it can look pretty decent. I have also uploaded the Inventor file in case you want to make any…
Replacement swingarm for a cheap monitor mount from amazon.…
This is a copy of the kawasaki ninja 300 swingarm cap 11065-0748-18T. Use sandpaper to give it a nice smooth finish and paint as you like. I used fs black from rsbikepaint. Prints in 2 and a half hours, 0.4 nozzle, 0.12 resolution, 50…
Just front swingarm for vintage nitro 911 from kyosho. It's 1998 model and i couldn't buy that in EU, so i made my own. Left=Right, just flip it. Print Settings Printer Brand: Anycubic Printer: Kobra 2 Supports: Yes Resolution: 0,2…
This is a cover that will fill the gap on the rear swingarm of the Talaria XXX. It will block water / mud from splashing onto the belt and other parts. The frame already has threaded holes that fit M5 screws. Warning: I can't guarantee…
Fits the frame tube where the swingarm connects on either side. This is a tight fit and should not come out.
BMW GS Swingarm Covers - Coperchio forcellone monobraccio Type A Type B Resize to adjust dimensions All our designs are free to download and use. Your support fuels our creativity. If you downloaded and enjoyed this file, please leave a…
Printed it with petG first and it survives at least 5 runs but had one serial crash so… so I've made it with TPU and it's kinda unbreakable now! More details here - https://bit.ly/LeoRc how it is installed: how the car can jump enjoy and…
I am looking for the more durable wltoys parts ;) More details here - More information here - https://bit.ly/LeoRc And this is how it was broken last time
printed with tpu on my creality k1 worked for my 06 yz125 right side of the swingarm
PETG Infil 40% Triangles 2 wall loops 95% Concentric for the top and counterbalance. (screen from slicer) Auto tree support If you're going to make swing arm on your own, this should be good enough reference, i havent found any free…
![GoPro Handle SwingArm [GoPro Griff Schwenkanschluss]](https://media.printables.com/media/prints/238205/images/2155985_64a6bf72-4d64-453e-9511-87a2b50933a1/griff.png)
