Talaria X3 Rear Swingarm Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Covers gap that allows dirt and water to hit the belt and other parts.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 180
- Wydruki
- 0
- Wyświetlenia
- 1347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a cover that will fill the gap on the rear swingarm of the Talaria XXX. It will block water / mud from splashing onto the belt and other parts. The frame already has threaded holes that fit M5 screws.
Warning: I can't guarantee this will fit your Talaria XXX. The holes appear to be machined onto metal knobs that could align differently on each frame. I have 2 bikes, and the same print fit both, so I'm assuming it should work for most. I would suggest printing 2 layers of just the side with the screw holes, then test the alignment on your frame.
Bill of Materials:
2 - M5 x 10mm screws
Changelog:
2023-1-2: Added extension to attachment side gap.