Liczymy pasujące modele…
Update 02.07.2024 - V3 Model with no blinkers. I saw that there were a couple of request regarding a model with no blinkers, new model added ;) Update 28.06.2024 - V3 model released! Updated the design so its easier to install the lid.…
This is a 1:9 scale full-suspension electric dirt bike model, inspired by modern compact e-moto designs. It features fully functional front and rear suspension, rotating wheels, and a removable battery, all while maintaining a clean,…
I recommend first trying out the original model by JR_Craftworks and if that still feels a bit loose or a bit too tight to close the lid then to give this version ago. I'm sure all bikes and batteries have different tolerances so there…
Wedge to secure the stock battery on a Talaria Sting E-Bike. Print on it's side with 6 walls and high infill.
I created this to prevent water / mud from flying up onto my back and helmet, and to add some sharpness to the esthetics of the bike. Bill of Materials: 2 - M4 x 6mm screws 2 - M4 nuts Attached to this is an assembly pdf. (not updated…
This is a cover that will fill the gap on the rear swingarm of the Talaria XXX. It will block water / mud from splashing onto the belt and other parts. The frame already has threaded holes that fit M5 screws. Warning: I can't guarantee…
This requires two holes to be lined up and drilled through the stock rear wheel cover. The holes should fit M6 screws. Bill of Materials: 2 - M6 x 14mm 2 - M6 nylon lock nuts Changelog: 2023-12-30: Thinned out tip and added inserts for…
front plate for the Talaria sting l1e with slots for the blinkers
I got asked to make this one for a buddy, snaps in to place with no issues! A easy model to print that snaps in place where the original horn should be! Enjoy! Printed on an Creality Ender 3 S1 Pro. Material: PETG Layer hight: 0.24 Wall…
A discrete compartment you can bolt under the Talaria XXX seat. Pictured here pritned in PETG-CF with 4 walls, 4 top/bottom layers, and a high 25% grid infill. More details here: https://jrm.cc/projects/talaria/under-seat-compartment/
This requires two holes to be lined up and drilled through the stock rear wheel cover. The holes should fit M6 screws. I designed this one to protect even more than the curved designed. The higher positioning blocks more water / mud that,…
This was made specifically for this brake light: I just found: https://a.co/d/03c3ORk0 The turn signals can be found here: https://a.co/d/09FuZZQT
Update 02.07.2024 - Updated model with a cooler design. V1 - I let the old simple model be available for those that want an easier print. Desgined in a single model rather than the two separete that comes originally with the bike. Mine…
This can be added behind the front steel plate below the controller. There's 4 screws to remove the plate, and behind it there is a horizontal strip with M5 screw holes in it. This model will fit onto those M5 holes and protect the cables…
I made this since i had lost one of my axle covers, instead of ordering a new one i printed on out of PETG. The original one has a diameter of 15.7mm, whilst mine is 15mm, its a bit lose, but better its lose then getting stuck :) Hope…
talaria xxx motor cover
This is a replacement for the horn in a Talaria XXX that serves as a convenient hiding place for an AirTag.
Adapter to mount readily available DR-Z license plate holder to Talaria Sting MX4. Use #10 1 inch metal screws to affix to frame, M6 bolts to affix license plate holder to adapter.
Introducing our Premium Quality License Plate Holder specifically designed for the Talaria XXX Ebike, engineered to perfection to complement your high-performance ride. Crafted with precision and durability in mind, this license plate…
Veryy easy to mount: Stick the logo on the plate. Unscrew the 4 screws holding the front indicators. Put the plate in place. Replace the 4 screws.
First shot of this protection device for Talaria Komodo Street Legal version I recommend to print in PETG, 3 layers. Can do the Komodo typo in a second color in your slicer for a spicier make :) I just added a version without the logo !
Mount this tail light to your MX4 https://a.co/d/5am4sAG
Remix of https://www.printables.com/model/926200-talaria-sting-front-blinker-bracket with cable passthrough channels
You might need to widen the opening a bit I made it a bit snug I will post the link to the key ignition i bought for this mod additionally you will need to remove all the covering on the ignition to make it flush but still look decent.…
u just need to insert the moon-shape like part inside of the footpeg springs, and the big donut like part outside of the peg
Always worried about breaking your key while opening the Talaria Komodo battery hatch? This model prevents this from happening by utilizing ATV-style protection for the original Talaria key. Print from PETG or any rigid material; no…
A simple holder to avoid having to carry an u block in your backpack. It is angled so the u block sits on the seat, and you can secure the u block with a piece of velcro. It uses 4 mm screws and bolts between the holder and the fixation,…
This is a spacer to allow the lower plastic piece to be remounted. Need some longer screws I used #10 1.5 inches long Seat Mod https://tbelectricmoto.com/products/emoto-x-seat-level-kit
Unlike setups that require you to retain heavy OEM mirror mounting hardware, this design includes a fully 3D-printable expanding internal wedge system. When you tighten the central bolt, the internal sleeve expands inside the handlebar…
Holder for shortening the rear fender. As the original didn't look well in my eyes I created a printable holder for the original backlight and number plate illumination. For this solution you have to cut the aluminium fender holder by…
The original problem: a center bolt, when tightened, compresses a rubber sleeve inside the handlebar. This rubber expands radially and presses against the inner wall of the tube, creating the clamping force that keeps the mirror from…
Replacement Turn Signal Button for Talaria Komodo. I lost my one off road. In case I'm not the only one. Have fun. Modells: Talaria Komodo Turn Signal Button Original - size and shape like original Talaria Komodo Turn Signal Button…
The winged sandal of Hermes — talaria , the "Mercury foot" — as a flat two-colour dangle earring. Side profile: sole, up-curled toe, low upper, and an ankle strap that arcs up over the heel and closes into the bail. A feathered wing…
Key Features: Smart Hardware Reuse: Designed specifically to utilize the exact same mounting screws and internal expanding inserts from the original homologated mirror setup. Crash Protection: Acts as a slider/buffer to absorb impact and…
Whether you are looking for a quick trail-side spare, a custom color accent for your bike, or a more ergonomic two-finger pull, this model provides a drop-in replacement for the stock Talaria brake levers. ⚠ DISCLAIMER: Brakes are a…
Included are models for the Carrier Plate, Riser, and Adapter plates. STEP and F3D available for easy modification. Additional hardware required: Attaching adapters to carrier platform: (4) 1/4-20 * 2.5" Carriage bolts (4) 1/4-20 Nyloc…
1x M5 Bolt needed (any longer than 2cm) Talaria Mx3-5/Komodo and x3 compatible endcaps for stock bars
A flexible bumper-style cover that protects the Talaria Komodo dashboard display from scratches, knocks and drops, while keeping the screen fully readable and the buttons usable. Remix of the "Talaria Komodo Dashboard guard" by Maxime…
This was made specifically for this brake light: I just found: https://a.co/d/03c3ORk0 The turn signals can be found here: https://a.co/d/09FuZZQT
