Talaria Sting R - Custom Brake Levers (Replacement & Upgrade)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bent or snapped your factory brake levers? Replace them with these custom 3D printed ergonomic levers for your Talaria.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Whether you are looking for a quick trail-side spare, a custom color accent for your bike, or a more ergonomic two-finger pull, this model provides a drop-in replacement for the stock Talaria brake levers.
⚠ DISCLAIMER: Brakes are a critical safety component. 3D printed parts can fail if not printed correctly or with the wrong materials. By downloading and using this file, you assume all risks associated with riding. Please test your printed levers in a safe environment before hitting the trails or streets.
Material: CRITICAL! Do not use PLA or standard PETG for this part, as they will snap under emergency braking pressure. You must use high-strength, impact-resistant engineering materials like Polycarbonate (PC), Nylon (PA), Carbon/Glass Fiber reinforced filaments, or highly tuned ASA.
Wall/Perimeters: Print with 8+ perimeters or simply set the infill to 100% solid. This part needs maximum density.
Orientation: Absolutely Crucial! You MUST print the lever lying perfectly flat on the build plate. The Z-axis layer lines must run parallel to the length of the lever so that the pulling force of your fingers does not separate the layers. Never print this upright.
Supports: Standard supports are required for the pivot hole area and the small actuator tab that presses the brake sensor/piston.