Talaria Sting 4000 Mirror Repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
replacement part for the mirror mount
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The original problem: a center bolt, when tightened, compresses a rubber sleeve inside the handlebar. This rubber expands radially and presses against the inner wall of the tube, creating the clamping force that keeps the mirror from rotating. Over time the rubber wears out: the clamping force becomes insufficient and the mirror starts spinning or slipping out of the handlebar.
This part replaces the original mirror mount (shown in red in the photo) that sits inside the handlebar of a Talaria Sting 4000, at the mirror mount, where the rubber wears out from repeated clamping.
Reuse the original screw. However, you will need to replace the nut: the original nut is a serrated flange nut, and it needs to be replaced with a standard nut (without serrations).
Print in PETG. Prusament PETG Ultramarine Blue matches the bike's original blue beautifully!