1 / 3
Hygrometer mount for Skroam Dry Box from SpacerX — zdjęcie 1
1 / 3

Hygrometer mount for Skroam Dry Box from SpacerX

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of SKROAM's dry box mount adding 0°/30° notch support and a cutout for easy battery changes without removal.

Ocena
5 / 5
Polubienia
2
Pobrania
6
Wydruki
1
Wyświetlenia
71
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

SKROAM Dry Box Round Hygrometer Mount (With Battery Access & Multiple Notch Orientations)

This is a remix of the excellent SKROAM Dry Box Filament Storage by SKROAM.

While the original dry box is fantastic, standard round digital hygrometers often come from different manufacturers with varying alignment notches.

🌟 Key Features & Improvements:

  • Multi-Angle Notch Support: Added cutouts to securely mount hygrometers that have their alignment tabs/notches oriented at either 0 degrees or 30 degrees. No more upside-down or sideways displays!

  • Easy Battery Access Cutout: A precise clearance slot has been added to the back of the mount. You can now slide off the battery lid and replace the button cell battery without needing to pop the hygrometer completely out of the mount.

🛠 Print Settings (Recommended)

  • Material: PLA

  • Layer Height: 0.2mm

  • Infill: 15% (Grid or Gyroid)

  • Walls/Perimeters: 2 

  • Supports: No supports required

Tagi