10 Inch Rack USB-C PDU with fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10 Inch Rack USB-C PDU with fan and fan controller
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I modified the original model to take a 3010 fan to blow air across the USB-C controllers, and put a spot for a DC controller if you have a fan that supports it, and cutout for the power supply fan rather than a recirculating situation.
In my configuration, the controller acts more like a switch, as the WINSINN fans don't like to run below 100% duty cycle. I plan on adding heatsinks to the USB-C inductors to help with heat dissapation.
If you don't want the DC controller, use the base file from the originator. I used normal 3010 fans for the airflow. In my remix, I secured the DC controller with M2 x 6 self tapping screws with M2 nylon spacers to standoff from the base, and M3 x 16 SHCS to attach the fan to the cover.
3010's: WINSINN 30mm 24V Fan
DC Controller: Acxico 6-28VDC 3A 80W PWM