Headphone & Headset Desk Stand — Arched Saddle Cradle (Customizable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Headphone & headset desk stand with an arched saddle cradle that holds the band securely. Parametric, no supports.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
A free-standing desk stand that holds your headphones by the headband. The top is an arched saddle — low in the middle, raised at both ends — so the band settles into the dip and stays put. A wide base keeps it stable and a tapered post looks clean on any desk.
The design is parametric, so the height, base size and cradle width can be adjusted to suit your headset.
Print settings: 0.2mm layers, 3 walls, 15–20% infill. No supports needed (gentle overhangs only). PLA or PETG both work well.
Want it in a different size?
This STL is free here and stays free. The catch with a fixed STL is that you cannot actually change those dimensions — so I publish the editable OpenSCAD source for this model on Cults3D. Open it, set the numbers you need, export your own STL:
Headphone & Headset Desk Stand — Arched Saddle Cradle (Customizable)
If you want a browse, I have 500+ printable models there: https://cults3d.com/en/users/cecogatev