50mm Water Pump V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The second design iteration of the 50mm 3D printable water pump. Printed using PLA for the casing and TPU for the seals.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 296
- Wydruki
- 2
- Wyświetlenia
- 2316
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
50mm 3D printed Water Pump V2
The second version of the 50mm Water Pump, this time it has the output tube directly on the impeller shaft rather than a channel first then the output tube. Again, TPU seals and Rubber O rings are used to achieve a fully submersible pump.
Useful Links
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.4mm
Infill:
10%
Filament:
PrimaValue/SainSmart PLA/TPU N/A
Notes:
The main body should be printed in PLA, and the seals and rotor should be printed in TPU. If using the pump at maximum speed, it is recommended to print the case in PETG due to the higher temperature tolerance.
Technical Drawing
