Spoon Rest — Drip-Catching Utensil Holder (Customizable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A countertop spoon rest with a deep drip well that keeps sauce off the stove. Parametric size.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
A simple, sturdy spoon rest with a deep drip well and a raised lip so cooking spoons and stirrers drain onto the rest instead of your countertop or stove.
Parametric: adjust the length, well depth and handle slot for ladles or large spoons.
Print settings: 0.2mm layers, 3 walls, no supports. PETG recommended near the stove for heat resistance; PLA is fine for general use.
Want it in a different size?
This STL is free here and stays free. The catch with a fixed STL is that you cannot actually change those dimensions — so I publish the editable OpenSCAD source for this model on Cults3D. Open it, set the numbers you need, export your own STL:
Spoon Rest — Kitchen Counter Cooking Spoon & Ladle Holder (Customizable)
If you want a browse, I have 500+ printable models there: https://cults3d.com/en/users/cecogatev