Spoon Rest — Drip-Catching Utensil Holder (Customizable)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A countertop spoon rest with a deep drip well that keeps sauce off the stove. Parametric size.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
A simple, sturdy spoon rest with a deep drip well and a raised lip so cooking spoons and stirrers drain onto the rest instead of your countertop or stove.
Parametric: adjust the length, well depth and handle slot for ladles or large spoons.
Print settings: 0.2mm layers, 3 walls, no supports. PETG recommended near the stove for heat resistance; PLA is fine for general use.
Want it in a different size?
This STL is free here and stays free. The catch with a fixed STL is that you cannot actually change those dimensions — so I publish the editable OpenSCAD source for this model on Cults3D. Open it, set the numbers you need, export your own STL:
Spoon Rest — Kitchen Counter Cooking Spoon & Ladle Holder (Customizable)
If you want a browse, I have 500+ printable models there: https://cults3d.com/en/users/cecogatev