Coffee Pod Holder — Countertop Capsule Organizer (Customizable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A countertop holder that cradles coffee capsules in a row so they stop rolling around the drawer.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
A tidy countertop coffee pod holder: each capsule drops into its own well so your pods stop rolling around the drawer and are easy to grab next to the machine.
Parametric: set the number of wells and the well diameter to fit your capsule size (MEASURE your pod body diameter first). Make a short row or a long counter strip.
Print settings: 0.2mm layers, 3 walls, no supports (the wells are open cups). PLA or PETG.
Want it in a different size?
This STL is free here and stays free. The catch with a fixed STL is that you cannot actually change those dimensions — so I publish the editable OpenSCAD source for this model on Cults3D. Open it, set the numbers you need, export your own STL:
Coffee Pod Holder — Countertop Capsule Organizer (Customizable)
If you want a browse, I have 500+ printable models there: https://cults3d.com/en/users/cecogatev