HexStack Modular Posca Marker Holder & Desk Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HexStack Modular Posca Holder: Free, support-free interlocking hex sleeves to build a custom art desk organizer!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Recommended 3D Printing Profile (Optimized for FDM Printers)
Since this model relies on stacking multiple interlocking units, keeping your printer calibrated will ensure the pin-and-hole locking mechanisms slide together easily.
• Machine Type: FDM (Fused Deposition Modeling)
• Nozzle Size: 0.4mm (Standard)
• Layer Height: 0.20mm (Standard works perfectly for this model)
• Wall Loops / Perimeters: 2 - 3 walls
• Top / Bottom Layers: 4 layers
• Infill Density: 10% to 15% (Higher infill is unnecessary, keeping print times fast)
• Infill Pattern: Grid or Gyroid
• Supports: NO SUPPORTS REQUIRED!
- Orient the sleeve flat on one of its outer hexagonal faces on the build plate.
- The alignment pins and internal cavities are fully optimized to print support-free without any sag.
• Material Advice: PLA works beautifully and offers crisp details for the locking pins. Choose a variety of colors to match your art studio style!