Water Pump Dampener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple shape designed to hold nearly any pump off the floor of a Persillade pot bottom.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
Settings:
top layers - zero
bottom layers - zero
perimeters - zero
infill type - gyroid
infill - 7%
Filament:
Prusament Jet Black TPU95A
0.32 layers
0.6mm hardened nozzle
Background:
The pump I got from the garden store was surprisingly quiet. That is until I put it in the ceramic Persillade pot from Ikea. Then it would ring like a bell and annoy everyone.
I wanted to design something that would both keep the pump from rattling around and allow enough water through. I thought about designing something with lots of holes, but that was going to be so much working out how to make sure all the overhangs would work.
Then I remembered I could just...make a small shell, then print without perimeters and top/bottom layers. The gyroid inflow would keep it all together and provide a buffer from the bottom as well.
I put it in and all the noise went away. The pump was back to silent.
Hopefully this can save your sanity as well!