IKEA 365+ Lid Hanger - Parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to store IKEA 365+ lids vertically, hanging from a shelf.
- Ocena
- 5 / 5
- Polubienia
- 140
- Pobrania
- 446
- Wydruki
- 2
- Wyświetlenia
- 1860
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I have a lot of IKEA 365+ lids and they were taking up too much space in my cabinet so I decided to design a hanger for them. There are other designs available but I needed something a little different. My requirements were:
parametric
efficient use of filament
compatible with both the square and rectangular lids, in either orientation
I've uploaded a few common sizes, but if you'd like to customize, open the model in OnShape (link) and modify the "lids" config to the desired number in the top left. Then right click on the part and export.
I printed with PETG and used command hooks to attach to the shelf, but other materials and methods should work just fine.