Floor drain cover with AC hose inlet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A basic floor drain cover (for balcony, bathroom, patio etc) with Φ17mm hose inlet for AC drain.
- Ocena
- 0 / 5
- Polubienia
- 170
- Pobrania
- 240
- Wydruki
- 0
- Wyświetlenia
- 1629
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A basic floor drain cover (for balcony, bathroom, patio etc) for Φ80mm drain with Φ17mm hose inlet for AC drain hose that I made out of necessity.
The inlet is inclined to assure proper drain of AC hose water and it also has holes in the pattern of the overall cover, as in a previous attempt with a solid inlet with no holes, I noticed stagnant water that obviously create hygiene concerns.
I added a couple of holes in the two ends of the inlet, to allow possible cable tie insertion for hose fixing.
I made two separate patterns with slit holes and with round holes. Preferred the first one, to match my standard drain cover.
In my initial test I printed in PLA but I strongly propose either a stronger material (eg ABS) or dense infill to assure durability.
Update 2026-07-16: Added also a square version of 95mm x 95mm and for 20mm hose diameter, after a request from a user.