Voron 2.4 LDO Kit - Stealtchanger moveable Z-Stop for Axiscope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You can reuse the Z Endstop from the LDO Voron Kit as a moveable Endstop for Axiscope.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This model lets you reuse the LDO Voron 2.4 Kit Z-Endstop PCB. Because of the extra depth that the Stealtchanger Shuttle adds to the toolhead I decided to just use the Z-Stop when i need to and not loose any Y-travel.
To fix it to the build plate you will need atleast 4x 6x3mm magnets, optionally 6.
I also added a stop to be able to always position the endstop in the same spot.
These are my parameters if i put the endstop in the front left corner using the stop:
zswitch_x_pos: 57
zswitch_y_pos: 49.50
zswitch_z_pos: 50
The Magnets are the same as in the axiscope camera housing.