Haunted hairstorm - HugeForge (3x5 tiles) + Frame

Haunted Hairstorm – 15 Tile Wall Art (HugeForge)

A haunting black-and-white fantasy artwork generated with HugeForge and split into 15 interlocking tiles (3×5 layout) for large-format printing. The artwork features a mysterious woman surrounded by twisting biomechanical tendrils, creating a dark and surreal centerpiece that looks stunning when assembled on a wall.

Print Layout

The model is divided into 15 numbered tiles arranged in a 3 rows × 5 columns grid.
Print all tiles and assemble them according to the included layout guide.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 240x123.3mm in size

You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.16mm and the Actual Thickness is 2.16mm

    #000000 Black  Transmission Distance: 0.1
    #455364 Dark Grey  Transmission Distance: 0.6
    #c4c4c4 Light grey Transmission Distance: 3.1
    #ffffff White  Transmission Distance: 6.9

This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to Basalt Grey
    At layer #13 (1.12mm) swap to Telegrey
    At layer #17 (1.44mm) swap to White for the rest.

Tiled Printing Instructions:
    Each Tile is it's own 3mf file (all saved in the Main model folder) with the correct Row and Column in the name.
    The GridLayout.png shows each section and it's size in mm to help visualize.

    It is important to note that in tiled images, some tiles will not have all of the color swaps and this is normal.
    It might be possible to skip lower swaps if they will never be seen and use a Height Range Modifier to print
    the lower portions faster.  Your image and colors will determine this.
 

Included Files

Artwork Tiles

• 15 image tiles (3×5 grid)

Main Frame

A modular frame system designed specifically for this artwork.
Features:

• Connector slots on all sides:

  • 2 top

  • 2 right

  • 2 bottom

  • 2 left

• Connector openings are printed closed with thin breakaway sections.

• Remove only the connector slots that are needed for assembly.

• Leave unused border connectors intact for a cleaner finished appearance.

LockKey Connectors

Small locking pieces used to join neighboring frame sections.

How they work:

1. Break out the required connector openings.

2. Insert the LockKey through the opening.

3. Rotate approximately 90°.

4. The key locks into the narrow section of the slot and secures both frame pieces together.

Wall Mount

Optional wall mounting accessory for simplified installation.

Features:

• Reinforced screw hole with internal support cylinders.

• Designed for improved strength when tightening a screw.

• Can be used instead of mounting directly through the frame.

Frame Screw Mount

The frame itself also includes a mounting hole sized for approximately a 6 mm screw, allowing direct wall installation if preferred.

Assembly Instructions

1. Print all 15 artwork tiles.

2. Print the required frame pieces.
    

   

3. Determine which frame connector openings are needed.

4. Carefully break out only those openings.
    

   

5. Leave outer-edge connector openings closed.

6. Connect frame sections using the LockKeys.
    

   

7. Shift each LockKey to lock it in place.

8. Mount using:

   • the optional Wall Mount, or
      

     

   • a 6 mm screw through the frame mounting hole.

9. Insert artwork tiles into the frame.

   

Printing Recommendations

• Print artwork tiles face-up for the best image quality.

• Use the same print settings for all tiles to maintain consistent appearance.

• A dark frame color is recommended to complement the monochrome artwork.

• PLA is recommended, though PETG also works well for larger installations.