Modular Electronics Breadboard Project Tray & Parts Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sturdy workbench tray designed to hold three full-sized breadboards and a dedicated side tray for components.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a custom-designed project tray built specifically for electronics prototyping and hobbyist workbench organization. If you are tired of your breadboards sliding around or losing track of your power modules and microcontrollers mid-build, this tray keeps everything securely in one place.
Features:
Three Breadboard Bays: Perfectly dimensioned to friction-fit three standard full-sized (830 point) solderless breadboards side-by-side.
Component & Tool Tray: A dedicated storage area on the side to hold your microcontroller (like an Arduino Nano), buck converters, power modules, loose components (LEDs, resistors), and your favorite adjustment screwdriver.
Low Profile & Portable: Keeps your circuit intact if you need to clear off your desk and move your project to another room or workbench.
Print Settings & Tips:
Material: Printed successfully in PLA (though ASA or PETG would also work great if you plan to use it near a hot soldering iron).
Infill: 15% to 20% (Grid or Gyroid works well to keep the flat base rigid).
Perimeters: 2-3 walls for durability on the divider lines.
Supports: None needed! This model is designed to print flat on the bed with clean, 90-degree internal edges.
Note: Depending on your printer's calibration and the brand of your breadboards, the fitment in the slots should be a snug press-fit. If your breadboards have backing tape, you can peel it to stick them down permanently, or leave it on for a tight friction fit.