Sakura Coasters + Simple Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed some coasters. Designed some pretty coasters. Printed some pretty coasters. Hope you enjoy!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
Hey all -
Needed some coasters. Wanted some pretty coasters. Designed some pretty coasters. Printed some pretty coasters. Hope you enjoy!
OH - holder is designed to fit 8 coasters.
Printed out of Amolen PLA Wood (Cherry Wood (reddish one), Dark Walnut (holder) & Sandalwood (greenish one)) on an Ender 3 S1. If you want full print specs... shoot me a message. My specs are dialed in for my machine. I did use a 0.6mm hardened nozzle with 0.2mm layer (probably would come out cleaner with a 0.4 nozzle and smaller layer height BUT I wanted my coasters sooner rather than later).