Twingo C06 Phase 3 Seat Handle Caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for inside broken seat handle caps
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Replacement cap for the seat handle / seat lever on the Renault Twingo (years 1998 to approx. 2007).
The original cap has a tendency to disappear over time (reason unknown). This replacement part was designed to solve the problem and securely holds the handle in place again.
Choose the right version according to your seat handle:
- 0 Tabs → if both original tabs on the handle are still intact
- 1 Tab → if one tab on the handle is broken
- 2 Tabs → if both tabs on the handle are broken
Compatibility: Tested on Twingo I (Type 1) from 1998.
Printing Recommendations:
- Material: PETG recommended, Nylon/PA6 even better (due to mechanical stress)
- Print solid (100% infill)– the model is designed without sparse infill
- Layer height: 0.2 mm or finer - No supports needed
Simply insert this replacement cap. It usually holds better and more reliably than the original.