Seeed Studio TRMNL 7.5" (OG) DIY Kit IKEA RÖDALM Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D printed frame system to mount your Seeed Studio TRMNL 7.5" (OG) DIY Kit securely in a 5"x7" IKEA RÖDALM Frame
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 103
- Wydruki
- 2
- Wyświetlenia
- 783
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
All of the purely 3D printed options for frames for the Seeed Studio TRMNL kit were, in my opinion, ugly and/or hard to print. After trying a couple of those, being dissatisfied with them, and with aesthetics in mind, which is really half the point with something like this, it seemed that the best path would be to build this into an actual picture frame. After scouring this website I came across oscarb's model that uses an IKEA RÖDALM frame. I thought it was a great idea and the end result looked great. I picked up a RÖDALM of my own, printed his model out and used it for a while, then decided to design my own in the same style and concept. See below for more information about the differences between mine and his.
Printing notes:
Print all three parts in the orientations given in the files
Some supports will be needed for the battery cage
Layer height 0.16mm, 0.2 would probably also work but I haven't tried it.
Print in PLA. Sizing of all the parts accounts for typical PLA shrinkage. No need to scale anything. I haven't tried printing this with PETG or anything else.
20% gyroid infill
Assembly notes:
Designed for and requires:
Seeed Studio TRMNL 7.5" (OG) DIY Kit OR Seeed Studio EE04 board + Seeed Spectra 6 7.3" screen.
5"x7" IKEA RÖDALM frame. I understand that this same model is sold/marketed as 13x18cm outside of the US.
Do not remove the metal retaining tabs that come built into the RÖDALM frame. They are needed to hold everything together.
Requires five M2x4mm screws to secure the logic board and the battery cage to the inner frame. Use caution if you try to use longer screws.
Fit the battery into the battery cage that's built into the inner frame, then secure it by slotting the tabs of the other side of the battery cage into the little slots made for it. Secure it with a screw.
Install the battery before installing the logic board.
The screw holes are self-tapping. It will be slightly difficult to install the screws into them the first time you assemble this. I recommend installing the logic board and battery into the inner frame before putting the inner frame into the outer frame, in order to avoid possible damage to the glass e-ink display.
Updates:
6-16-26: Uploaded a new version of the inner frame that more easily allows a USB cable to be plugged in.
7-23-26: Uploaded a new outer frame for use with the Seeed Studio Spectra 6 7.3" e-ink screen. Also uploaded new versions of the inner frame and battery cage so that slightly thicker batteries can be accommodated. Now up to 10x60x40mm batteries can fit.
Note about the Spectra6: I homebrewed my own firmware for the Seeed EE04 board paired with the Spectra6 display. There's no official TRMNL support for this hardware currently. I can make my forked firmware available if anyone is interested. However, you might find limited options to actually serve color images to it.