Picatinny/NATO rail adapter for camera cages and cheese plates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your Picatinny/NATO accessory, such as a gunsight, on your camera cage with standard 1/4-20 screws at 9mm spacing.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter allows you to attach an accessory that requires a standard Picatinny/NATO rail mount, such as a gunsight, to your camera cage, such as the one sold by Leofoto, or other mounting arrangement that uses standard 9mm spacing and 1/4-20 screws.
I designed this for a friend who's a wildlife photographer. The photos show his setup: a gunsight is mounted to the camera cage, making framing shots with a long lens much easier. The adapter is the piece in blue between the gunsight and the cage.
I recommend printing it on end with extra perimeters for strength. I've had good results printing it in PLA at 102% to allow for shrinkage, or in SLS nylon through Xometry at 100%.