Center Console Change Holder for RAV4 2007-2012
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A change holder I designed for a '12 Rav4 Center console. I am not sure if all model years of this generation have the…
- Ocena
- 4 / 5
- Polubienia
- 11
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 970
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
A change holder I designed for a '12 Rav4 Center console. I am not sure if all model years of this generation have the same center consoles.
This Design allows change to be organised in the upper compartment of the RAV4's center console and keeps coins from falling out when accessing the lower compartment.
Double check your slicer settings to make sure the top of the model has proper bridging and no supports will be needed. A light warning that PLA may slightly deform due to high temperatures inside a vehicle in the summer but doesn't cause any major issue. PETG may yield better results for prints inside a vehicle.
Category: Automotive