206 modeli
⚫SKARO DALEK⚫ I decided to update this model and redo it from the ground up. I wanted it to be more accurate and colorful and completely without supports. I think it turned out beautifully! More Daleks updates coming every Saturday! And…
I have a Ford Focus 2012 (Hatchback) and after 9+ years of prolonged heat, the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Update…
Maqueta del Ferrari F2012 que pilotó Fernando Alonso en el año 2012
I have a Ford Focus 2012 (Hatchback) and after 5 years of prolong heat the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Print…
There is not a way to disable the passenger seatbelt alarm. Pluging this in lets you “turn off” the alarm. This should not be used if a person is in the seat. I've included a few variations of the buckle. Beveled Pyramids Grids Spiky
This is a reupload and thought it'd be awesome to have this on Printables. Since the existing cupholders doesn't fit anything in this world, I decided to make one that fits normal 33ml cans. The small square hole in the middle is for…
F1 Red Bull Racing RB8 2012 Wall Art Silhouette model. Adjustable size. I acept model suggestions.
Ball joint split into two parts, hold together with screws. Like this the ball can easily be inserted to the joint and the grip / friction can be fine tuned. Slides on the original metal part which is glued to the glas and interfaces the…
It just slides along the top of an iMac ;) I made mine for the 2017 27" 5k iMac with the “Thin Unibody” design, but it should work with really any 2012-2020 model iMac with the same basic body. All the little print does is sit in front of…
My Judge Dredd 2012 Inspired Helmet Untested. Category: 3D Printing
3D Ford Fiesta Model Keychain Recommended Print Settings: 0.12mm Layer Height Tree Support Enabled Recommended Length is 16mm Lower Print Until Undercarriage Touches PrintBed (optional) Print Settings Printer Brand: Creality Printer:…
There's no cabin air filter on these trucks. There's just a big hole. This adaptor installs over the hole to allow you to install the included paper air filter. It includes the adaptor, one replaceable paper filter, and the bolt/nut/wedge…
Well my father used to have a 5D Hundai I30 II 2012 as a daily ride. It was a great car but after few years it started to reguraliy loose those roof rack covers. Those were preety cheep but also annoying as you would have to glue them in…
I made this file to make Rally vents for my 2013 Ford Focus ST for track days. When I printed the files I cut it in to thirds and acetone welded them.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
5 периметров, от 20% заполнения, печать как указано на фото и с поддержками древовидными. можно печатать с технологией нечеткой оболочки. //// 5 perimeters, from 20% filling, printing as indicated in the photo and with tree-like supports.
Not the most gentle enviroment for a 3d print, so I needed to think about sun exposure, rain, roadsalt, g-forces, stone chips, etc in the design and filament, but the outside needed to look perfectly like the others, as you'd see two of…
This is used in the event you are installing some accessory that is being hardwired to the cars interior fuse box. This is a remix of the following link:…
Civic FB 2012 Hood Rod Clip Print Settings Printer Brand: Bambu lab Printer: P1P Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Notes: No raft or supports required Category: Automotive
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I replaced the double-DIN touchscreen stereo in our 2012 Subaru Impreza Sport Limited with an aftermarket SONY XAV-AX100 (which I really don't recommend) and could not find an appropriate trim piece specifically for the Sport Limited. The…
This is a Volkswagen Golf plus model I converted from SketchFab using 3d builder to be 3d printable model. I hope you enjoy printing this model. Link to model:…
Designed to fit the cupholder closest to the arm rest in a 2012 Ford Explorer and holds a slim 12oz can. My wife said, “it's good,” which is the equivalent to a prestigious design award. May fit other model years or vehicles, see image…
A headlight conversion for the 2012-2018 KTM 690 Enduro and SMC R. This updates the front of the bike to use a 2017+ EXC style front plate and headlight. Required hardware/parts 2x M5 Heat set inserts 2x M5x12mm bolts 2017+ EXC front…
I haven't been able to find the factory cupholder insert at a junkyard, so I took a stab at designing my own. Fits a large Nalgene and a normal sized cup.
Zwei verschiedene Messuhrhalter für eine Multifixaufnahme B. Für Längs und Plan Messung. Maße siehe Zeichnungen. Montage über Gewindeinserts M5 (M6) - dazu Mutter M4 und Halteschraube M6 Two different dial gauge holders for a multifix…
Fiat 500 shifter cable bushing. There is a recall for those, but it's helpful to have a quick replacement in case of temporary situation.
I made this model to align my cheap USB cameras for stereo imaging. It's press fit for the PCB, and enough space to add some glue to fix the cables. Distance of the cameras is 35mm. I'll add a cover plate later maybe with a strain relief.…
3D scans from Grenadier Subterranean Terrors set. The Vi-Perdon has some damage that looks like I must have shot it with a BB gun when I was a kid. Kids are dumb. I do not own rights to these models. If a rights holder exists and wants…
This is a replacement knob for volume and channel. It might also work on Armada.
replacement e-brake button for a 2012 Civic SI I recommend you print this in PETG so that it will not warp if the car gets hot. I found that the button is possibly a little loose, but it worked well enough that I have not modified it…
This was designed quite a while ago for a 1st generation Toyota Auris 3door hatchback. Adapter for the back might also fit the 5door hatchback version... i would assume so. Because this is automotive use i would reccomend atleast PETG…
iPad holder that can turn your old iPad 2012 into photo frame. Contains a hole for camera to so that the iPad can auto-adjust brightness as well as cutout for charging cable. The cable connector needs to be t-shaped.
door plug for subaru forester, i made it for forester of 2013 year.
Recommended to print standing on it's side longways with a substantial brim.
40mm front dash tweeter bracket for GP/GJ Impreza, XV, Crosstrek (2012-16), to adapt the factory tweeters to a 40mm round aftermarket tweeter. Probably also fits VM Levorg (2014–20) and VA WRX (2015–18) as the Subarus from that era used…
Hello! I wanted to make a tablet mount for a Ford F-150 (2012) and found Ryan000's model for a Fire Tablet 10". I had a smaller tablet available so I made a remix to fit my tablet. Hope it helps anyone looking for a slightly smaller…
This is a remix of an awesome design by @benproductions on thingiverse. All I did was edit the seat post adapter in order for it to be able to fit my 2012 Cervelo P2. I will attach the onshape files I used to create the seat post below so…
About I bought this cheap little camera figuring I could either make a box and mount for it, or someone else would have one ready. I didn't see any options I liked that were pre-made, so I came up with this. Uses standard action camera…
This allows you to mount a MagSafe compatible iPhone in the 5th generation (2012-2018) Nissan Altima for use as a secondary screen. Works great with maps as well as the new StandBy feature in iOS 17. Fits in solidly to the lower storage…
This is a guard for macbook pro late 2012 charging cable to protect it from breaking. Or if the cable is damaged, like mine, it can help to fix it in place.
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!
Simple to print (ABS suggested due to heat) for the Mac Mini 2012 edition to allow for extra air flow under the unit. I find during intensive work (video conversions especially) the bottom of the unit gets very hot. I have a fan nearby,…
Hummer H3, 2004-2012 GMC Canyon/Chevy Colorado trucks do not have paper/fiber cabin air filters - just a mesh wire to keep large debris from entering the cabin air intake. This adapter allows you to add and quickswap a cabin air filter.…
This is the blank for my other upload. You can set the holes to wahtever you want. I made this file to make Rally vents for my 2013 Ford Focus ST for track days. When I printed the files I cut it in to thirds and acetone welded them.
This is an ergonomic tray for your legacy Apple Magic Keyboard & Trackpad from 2012. It replicates the layout of a MacBook Pro 16" from 2021. I recommend printing it in a single block of PLA plastic. It looks best when printed in white…
One big and one small lid to cover the access holes for changing the headlight bulbs. Printed in TPU. Fits Peugeot Parner 2008-2012 but may fit other models. Small lid is for 76 mm hole, big lid is for 83 mm hole.
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Iconic Movie Props - The Hunger Games - Mockingjay Pin - 2012
There is not too much place for second cup in the car, but there is useless coins storage. So i did scan of this storrage and made model of simple cup holder that fit into. Just be carefull, there is cable under stis storrage, it's not…
This is version 2 of my TMNT 2012 stand. I wanted a classic stand that will allow your figurine to stand as well as something that is appealing. My older version is here: https://www.thingiverse.com/thing:3579217 Print Settings Printer…
Adapter for the dust extraction system of the Makita 2012NB planer.
Application note Gen 4 Impreza/Trek * 2012-2016 Impreza *2013-2017 Crosstrek This mount pushes into the space between the top of the radio and the dash. It sets the phone directly in front of the vents to keep it cool while charging. This…
This model is compatible with the lego system.
A replacement knob that goes in the back of a Chevy Volt cargo area
NOTICE: This has been tested with a 8th gen Honda Accord. Only vehicles using a similar keyfob will work. A replacement enclosure for Honda key fobs that requires no screws and has built-in, custom supports for easy assembly and printing.…
A simple adapter to mount an SSD hard drive in Apple iMac 27" 2012 - present. Printing time approx. 70 minutes 14 grams of filament Category: 3D Printer Parts
This is a modified cover for a 2012 Mac Mini with a cable outlet for the front panel usb hub I made.
A change holder I designed for a '12 Rav4 Center console. I am not sure if all model years of this generation have the same center consoles. This Design allows change to be organised in the upper compartment of the RAV4's center console…
Horror Movies - The Cabin in the Woods - 2012 3D printable model.
These are caps for the 2008-2012 (pre-facelift) BMW F800GS, with enough room to fit LED headlamp bulbs with built-in heat sinks. I designed these because the other model floating around totally didn't fit my (2009 model year) bike, the…
This custom-designed bracket provides a seamless and secure mounting solution for a reverse backup camera on your 2012 M
3D Ford Fiesta Model Keychain Recommended Print Settings: 0.12mm Layer Height Tree Support Enabled Recommended Length is 16mm Lower Print Until Undercarriage Touches PrintBed (optional) Print Settings Printer Brand: Creality Printer:…
One of Judge Dredd’s less lethal gadgets this gas grenade features pullable pin and spring loaded actuator to throw the spoon clear when you pull it. A ton of fun and a surprising twist to go with any Judge’s ensemble. Build Guide:…
Two adapters to connect the industrial vacuum cleaner to the cyclone separator. Adapter A is for The original Makita hose to the Cyclone separator and Adapter B to connect the Dewalt hose to the vacuum cleaner. Print instructions Printed…
Tiguan 2012 - Mophie phone mount. The mophie mount breaks easily - print and then reuse existing parts. Printed in asa/abs with supports. Print on it's side.
This ventilation rack for Renault koleos have four parts to have the same motion of the original rack and can redirectionate the air Category: Replacement Parts
Part for replacement of a broken pin of trunk cover
Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: WYZ Works PLA Black Category: Automotive
This mount has room for two pins, that will charge the nexus when you put it in the mount. You will need: An usb cable A small peace of conductive metal, like a nail or similar. Preferably cobber. Iron will do. Sodering equipment Wire…
Just like I said, this is an ST-style badge for your 2012-2018 Ford Focus SE. The print file includes the pauses to do the filament swap. Printed in silver silk PLA with red PLA infill. 0.4 nozzle with .2 layer height.
Makita 2012NB dust collector adapter to insert a 44mm connector for a Festool dust extractor. You can still use it with a 50mm diam (DN50) dust collector hose (outer diameter of the adaptor). Be aware Festo have different type of…
Cup holder expander for a 2012 style cup holder to widen the circumference of the cup holder. Doubles as a little bin! Fits both of the front center cup holder slots. Printing Instructions Print in your preferred material with as much…
TMNT 2012 Figurine Stand. First created this stand in Blender, but only had support for one foot, so I recreated this in Fusion 360 from scratch. Supports both legs. Can stand literally anywhere. UPDATE: Version 2 is now available:…
With this simple stand you can save some space on your desk :) If you like to add some internal protection to your stand, you can use a “PlusGap” model, if you don't, then use the default one. Supports : Yes Infill : 20% Let me know if…
I broke the loop on my nissan leaf keyfob so I printed a replacement. I believe I tossed an M2 grub screw in the hole to hold the key. (The original had just plastic injection molded around the metal of the key)
This is a stand for a Macbook Pro 15 inch (retina) from 2012. It fits nicely. The notebook gets enough ventilation and it looks gorgeous :-) Category: Computer
This is an extremely large print for (2012) Audi A3 owners (maybe other Audi's as well) to drop into the two-stage cup holder size we have. 207.50mm (X) × 200mm (Y) × 217.40mm (Z). It's off-center 7.5mm to move it slightly toward the…
BEWARE: this is a really bad model! :) I don't use CAD software - i am Mr. Slicer Editor (lol) - download at your own cringe risk! I wanted to have a Magsafe holder for the mould in the Toyota RAV4 front center console. It has like a…
If you like my design you can support me on BuyMeACoffee - https://www.buymeacoffee.com/kaushikbm -------- Tilt feet for Tektronix scope. Designed using FreeCAD. Print Settings Printer: FDM printer Rafts: Doesn't Matter Supports: Doesn't…
August 21, 2012 The AO-100 is a MendelMax variant printer that has been slimmed down for a smaller foot print that matches the print size of the Prusa Mendel. With an aluminum extrusion frame the AO-100 is an extremely sturdy printer…
This is an FDM optimized replacement part for the plastic female part of a Mercedes W212 2012 trunk well lid hinge. The model available for download is the right hand side. Mirror the file in your slicer to get both sides of the…
A simple adaptor to connect the Makita 2012NB thickness planer extractor shroud to a 63mm flexible hose in a dust extraction system gcode reflects a PLA print, but as my mini hates PLA its a really slow config
Ein Absaugschlauchadapter für die Serienmäßig mitgelieferte Absaughaube des Makita Dickenhobels für Saugschlauch 100mm. Der Adapter ist für 75 Innendurchmesser auf Saugschlauch 100mm. Die Absaughaube hat einen 75mm Aussendurchmesser…
Für den Einbau die Lüftungsdüsen aus dem Armaturenbrett ziehen und den Bauteil Phoneholder mitsamt den Lüftungsdüsen wieder ins Armaturenbrett einschieben. Die Poco F3 Aufnahmen ist wieder der Name schon vermuten lässt für mein Poco…
It was tested in the field and survived very rough desertic weather conditions. I'm 100% sure it fits models 2012-2014, unsure about other models, but could measure the STL and your bike to compare. Print Settings Printer Brand: Prusa…
I'm building a hard mount stand to position two tablets above my monitor. This model is designed to be attached with screws to a piece of wood. The wood is going to be held up with a mic stand. I added hexagonal holes to reduce the amount…
Adaptador de Makita NB2012 (diametro 75,25 mm) a aspiradora Bosch GAS 12-25 PL (355 mm).
Brackets use existing frunk tub mounting holes. Supports 4 gallon air tank in proper orientation (drain down). Manifold bracket uses velcro straps to attach to the tank. Very sturdy setup.
I created this simple console organizer for Gen 3 Toyota Rav 4 (2006-2012). It has 2 dividers that creates 3 compartments, ideal for organizing tissues, pens, flashlight, etc. Finger cutouts in the middle make it easier to grab objects.…
It is necessary to use supports. Brim is recommended depending on the adhesion of your plate.
I designed this organizer to separate the two cupholders in my car. It helps prevent bottles from tipping over and also doubles as a small storage space for coins, lip balm, or other small items. The coin slot is sized to fit any Euro…
2012 Ford F250 Grab handle. My coworker slipped and ripped the handle off the original. It'll mount to the metal bracket that was originally in place. You'll need: Washers for the middle 3 mounting holes to space them properly(I may…
A simple cap for the Opel Ampera (Chevy Volt) MY 2012-2014 windshield fluid receptacle Print Settings Printer: Heavily modded Craftbot Rafts: No Supports: No Resolution: doesn't matter Infill: 20% Notes: A very easy print. Print in ABS or…
recomendado imprimir ABS o mas resistentes 4 paredes 25% relleno panal abeja pegar con un muy buen pegamento con soportes los enganches boca abajo para que resistan mas enganches necesarios 6
Fits a 1" tweeter (1.72" outer diamater shell) with mounts for GEN 1 2010-2013 Kia Soul. Modeled after my 2011. Originally modeled for BOSS 1" tweeter from Amazon. UPDATE 1.1: I printed the original model and it worked / I managed to…
[updated 7/2/2025] 2012 Jeep Wrangler JK Interior Cabin Air Plenum spacer. Replaces the original open cell foam that sits between the cabin air filter housing (with the interior/exterior air flow actuator) and the duct leading to the…
Custom Overhead Light Base Panel - Kia cee'd (2006-2012) This is a universal mounting base for the front interior light console. It is designed for DIY enthusiasts who want to create their own custom LED lighting, switch panels, or…
John Dies at the End - Meatman - 2012 3D printable model.
![Doctor Who - Post Time War Dalek [2012] ★SKARO DALEK★](https://media.printables.com/media/prints/75799/images/7871489_a41a8051-5d2e-4fd8-99e1-5c8b16749666_987f6701-daaf-43a1-8701-4326e696a9f1/gg1.png)
![[updated 7/2/2025] - 2012 Jeep Wrangler JK Interior Cabin Air Plenum spacer](https://media.printables.com/media/prints/cac66c3d-f414-4c7c-9eff-302ab8076bfa/images/10106236_a72997ff-098d-4c52-a1cf-433601146e4b_2621f605-70af-4e7a-8d89-c8767bd2ce10/cabin-air-plennum-original-foam-jeep-jk.jpg)
