1 / 2
64oz Cup Holder / junk tray for 2012 Audi A3 8P — zdjęcie 1
1 / 2

64oz Cup Holder / junk tray for 2012 Audi A3 8P

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Drop-in water bottle holder for a large water bottle.

Ocena
0 / 5
Polubienia
5
Pobrania
49
Wydruki
0
Wyświetlenia
1696
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an extremely large print for (2012) Audi A3 owners (maybe other Audi's as well) to drop into the two-stage cup holder size we have.  
207.50mm (X) × 200mm (Y) × 217.40mm (Z). It's off-center 7.5mm to move it slightly toward the armrest, away from the shifter.

The cup holder situation in my car is enough to hold 2 normal-sized 16.9 oz bottles but not much more.  It's more like a normal cup holder and a half because the second one is about half the size and depth. This aims to solve one problem, and that's to add one massive cup holder so I could fit my large Costco 64oz insulated water jug.  I've also been using this as a little junk container too, to hold my phone, the rest of my keys, & loose change.

The first photo is of the bottle and cup holder.  I had not yet removed the internal supports.  The second photo shows it right as it finished the print.  I have also included two spacers for some of my other bottles. 

I printed this on my CoreXY (Creativity Elf, sorry I don't own a Prusa… yet) in PETG to avoid melting in the summer heat.

I printed with the following configuration:
0.6mm nozzle
240°c
50% fan
0.3mm layer height
70mm/s
3 perimeters
15% infill
Supports

This took me 17 hours 12 minutes to print.

I suppose if you trust your printer not to knock your prints over at height, you could bypass the supports and print upright instead of upside-down; maybe a fat brim would help?  

Lastly *I designed this a while ago so I had to purge my Fusion 360 files to make room… unfortunately I don't have anything but the 3mf files.*

Tagi