Multimeter Stand for Alientek DM40
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multimeter Stand for Alientek DM40
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Stand for Alientek DM40 Multimeter and its Accessories:
Improvements:
◦ Test probes can be inserted into the stand with or without protective caps
◦ Model has built-in ON / OFF / LOCK button
Non-printing necessary accessories:
◦ 4x M3 Heat-set nuts (Outer diameter 5 mm x height 4 mm)
◦ 4x M3 16 mm countersunk head screws, Philips drive (PH 1)
Recommended Print Settings: 🖨⚙
◦ Material: PLA
◦ Nozzle diameter: 0.6 mm
◦ Layer height: 0.25 mm
◦ Perimeters: 2 (with 0.4 nozzle use 3 perimeters)
◦ Infill: 25%
◦ Print speed: ~ 30 mm/s
◦ Print orientation: As in STL files
◦ Support: No
There is also a Windows Bluetooth app for DM40 (A, B, C) multimeters available on my Github repository:
https://github.com/Urobotos/DM40-Wireless
Assembling:
Insert four heat-set nuts into the Stand and screw the Hooks onto it using 16mm M3 screws:
✔ Once you're done, you can equip the stand with your accessories:
