Ryobi Battery Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of a very well designed Ryobi Battery Holder
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
The original model was made by https://www.printables.com/@Jerrari and is extremely well designed. I wanted to make this compatible with the Ikea Skadis pegboard.
Uses T-Nuts.
It mounts using the SKÅDIS T‑nut system. You can find the T‑nut print files here: https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb
Both M2.5 and M3 mounting options work. I prefer the M3 version for added sturdiness. I designed it to not alter the original design too much. However, to make the supports more solid, I added a 3rd t-nut mounting option so that the heavier batteries are supported by the mount.
I didn't want to redesign the screw hole that goes through the holder section, so I decided to space the other 2 holes spaced at 40mm from this one hole. This means that the mounts do not line up end to end as is the case with the original. However, the space is marginal and doesn't waste much space in between. See images.
Hope this works for others.