AD5X Enclosure Lid Holder / Support Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For the AD5X Enclosure
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
The AD5X Lid holder support brackets are crafted for stability and strength, ideal for securely holding glass or similar materials on a 3D printer. With a sleek and functional design, they blend seamlessly with the printer's aesthetics. These brackets are designed to hold a protective lid securely on top of the printer but also allowing the li to be adjusted to maintain a air gap when needed , providing additional safety and maintaining an optimal printing environment. When printing the AD5X Lid holder brackets, use a strong filament like PLA+ or PETG for durability. Ensure high infill settings (around 15%-20%) to maintain structural integrity. Simply attach each bracket to the designated corner of your 3D printer.
Simply push into the preformed holes on the enclosure.
Each bracket is numbered -
Number 1 - Front Left and Back Right corners.
Number 2 - Front Right and Back Left corners.
The Brackets will give 4 positions for the lid allowing different air gaps -
0mm air gap
10mm air gap
20mm air gap
30mm air gap
With all 4 positions the lid is secure and will not slide out of the brackets.
0.20 Layer, 4 Walls, 20% Infill
1 Plate
Np Glue
No Skirt
No Brim
Requires a small amount of supports.
PLA or PETG - Grey