European Multi-Plug Mounter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Multi-plug power cables unnecessarily take up floor space in homes and offices. Many lack the necessary holes for wall mounting. I used to try opening them up and drilling holes in the back covers to mount them on the wall, but the back covers weren't strong enough, so I had wasted one already. To mount the multi-plug on the wall without altering its original shape, an externally gripping holder is essential.
This design is for oval-cornered European-style multi-plugs. It consists of two parts. As you can see, one part is used on the side where the cable enters. I mounted the plug on the side of my desk, on a wooden surface. If you tighten and screw the plug securely, it holds very well. To be on the safe side, you can touch it up with a drop of hot glue or similar adhessive on both sides.
A low quality print with PLA, even with 20% infill, will do the job. Both prints took a total of 50 minutes.
Good printing