European Multi-Plug Mounter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.64 – €0.78 net (excluding VAT)
For file: PlugsetMount-Both.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.71 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 48 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Finally I have mounted the very vagrant multi-plug on the side of my desk. The design is for European Multi-Plugs.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 0
- Views
- 58
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Multi-plug power cables unnecessarily take up floor space in homes and offices. Many lack the necessary holes for wall mounting. I used to try opening them up and drilling holes in the back covers to mount them on the wall, but the back covers weren't strong enough, so I had wasted one already. To mount the multi-plug on the wall without altering its original shape, an externally gripping holder is essential.
This design is for oval-cornered European-style multi-plugs. It consists of two parts. As you can see, one part is used on the side where the cable enters. I mounted the plug on the side of my desk, on a wooden surface. If you tighten and screw the plug securely, it holds very well. To be on the safe side, you can touch it up with a drop of hot glue or similar adhessive on both sides.
A low quality print with PLA, even with 20% infill, will do the job. Both prints took a total of 50 minutes.
Good printing