Bending tool for marching lyre
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The bending device is specially designed for a marching lyre to create precise bends up to an angle of 90°
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
The bending device is specially designed for a marching lyre to create precise bends up to an angle of 90°. It features a mobile clamping jaw guided by screws to hold and form the lyre accurately. Clamp the bending device firmly into a vise before use. The mobile clamping jaw features an integrated hole. You can optionally insert a metal rod/bar into this hole to reduce the force required for bending. Up to this point, the device has been successfully operated without using the extension rod.
Part list:
printed parts | quantity: 1 set
cylinder head screw M4x35 | quantity: 2
hexagon nut M4 | quantity: 2
cylinder head screw M4x45 (for clamping jaw guide) | quantity: 2
Print instruction:
material: PETG
supports: partial required
layer height: 0.2mm or 0.3mm
nozzle diameter: 0.4mm or 0.6mm
brim: not required
enclosure: not required
Assembly instruction:
Refer to the reference image to see how the printed parts, guiding screws, and nuts are assembled.